OK Tubrod 410NiMo

Brand
Esab
Ceweld product
Type
Metal cored CrNiMo alloyed welding wire for rebuilding and cladding
classification
AWS
A 5.22: E410NiMoT0-4
EN ISO
17633-A: T 13 4 M M21 2 / T 410NiMo
W.Nr.
1.4313
Applications

AA M410NiMo is a Cr-Ni-Mo- alloyed, gas-shielded metal-cored wire electrode for cladding. The corrosion resistant deposit offers a medium hardness and is resistant against metal-metal wear and high surface pressure. He is used in steel mill rollers, thermoshock resistant and suitable for Francis and Pelton turbines. Used in steam power plants for its excelent resistance to cavitation and stress corrosion cracking.

Type
Metal cored CrNiMo alloyed welding wire for rebuilding and cladding
Applications

AA M410NiMo is a Cr-Ni-Mo- alloyed, gas-shielded metal-cored wire electrode for cladding. The corrosion resistant deposit offers a medium hardness and is resistant against metal-metal wear and high surface pressure. He is used in steel mill rollers, thermoshock resistant and suitable for Francis and Pelton turbines. Used in steam power plants for its excelent resistance to cavitation and stress corrosion cracking.

Properties

Good corrosion and abrasion resistance as required by water turbines in hydropower plants.

Classification
AWS
A 5.22: E410NiMoT0-4
EN ISO
17633-A: T 13 4 M M21 2 / T 410NiMo
F-nr
6
FM
5
W.Nr.
1.4313
Suitable for

13%Cr - 4%Ni - 0,5%Mo Steel 

1.4000, 1.4001, 1.4002, 1.4313, 1.4317, 1.4407, 1.4413, 1.4414,   

GX4CrNi13-4, X3CrNiMo13-4, GX5CrNiMo13-4, GX4CrNiMo13-4, X 6 Cr 13, X 7 Cr 14, X 6 CrAl 13

ACI Gr. CA 6 NM

Welding positions
PA
PB
PC
Redrying
140°C / 24 hr
Gas acc. EN ISO 14175
M21
Analysis
C Si Mn P S Cr Ni Mo N Cu Nb+Ta
0.06 0.8 1 0.015 0.015 12.5 4.5 0.5
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
0°C
As Welded 800 890 19 67 40 HRc
Product sheet
MSDS
product sheet
Ask quotation
MSDS