SELECTARC ALS5 TIG

Brand
Selectarc
Ceweld product
Type
Tig aluminium welding wire alloyed with silicon
classification
AWS
A 5.10: ER4043
EN ISO
18273: S Al 4043A (AlSi5(A))
W.Nr.
3.2245
Applications

Tig filler metal for welding Aluminium alloys with maximum 2% alloying elements and for aluminium alloys containing up to 7% Si.(after anodizing welding will be of a dark grey colour)

Type
Tig aluminium welding wire alloyed with silicon
Applications

Tig filler metal for welding Aluminium alloys with maximum 2% alloying elements and for aluminium alloys containing up to 7% Si.(after anodizing welding will be of a dark grey colour)

Properties

Thanks to its excellent weldability and good penetration this alloy is used mainly in construction and automotive industry. The silicon addition results in improved fluidity (wetting action), making the alloy the preferred choice of welders. The alloy is not sensitive to weld cracking and produces bright, almost smut-free welds. Not recommended for anodizing. Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding.

Classification
AWS
A 5.10: ER4043
EN ISO
18273: S Al 4043A (AlSi5(A))
F-nr
23
W.Nr.
3.2245
Suitable for

AlMgSi 0, AlSiMg (A), AlSi 1 MgMn, AlMg1SiCu, 3.3206, 3.3210, 3.2315, 3.3211, EN AW 6060, EN AW 6005A, EN AW 6082, EN AW 6061, EN AC 45000,

Approvals
CE
Welding positions
PA
PB
PC
PD
PE
PF
PG
Redrying
Not required
Gas acc. EN ISO 14175
I1, I3
Analysis
Si Mn Cr Ti Fe Cu Zn Al Mg Zr Be Ga+V Si+Fe V
5 0.1 0.1 0.3 0.2 Rem. 0.1
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 70 130 17 HRc
Product sheet
declaration of performance
declaration of conformity
MSDS
product sheet
Ask quotation
MSDS