Selectarc HRT 63
CEWELD®E DUR CE-Tube 62 with its extreme recovery provides excellent wear resistance in high speed and fine particle applications where erosive wear is a major problem. It is also suitable for high general wear and medium duty applications.
Areas of application are: Knives and hammers of sugar mills, clinker crushers, lining plates, ripper tines, mixer blades, gravel washing plants, ceramic mixer blades, paddles, extruders.
CEWELD®E DUR CE-Tube 62 with its extreme recovery provides excellent wear resistance in high speed and fine particle applications where erosive wear is a major problem. It is also suitable for high general wear and medium duty applications.
Areas of application are: Knives and hammers of sugar mills, clinker crushers, lining plates, ripper tines, mixer blades, gravel washing plants, ceramic mixer blades, paddles, extruders.
CEWELD® E DUR CE-Tube 62 can maintain its abrasion resistance even at elevated temperatures due to its Mo content. For overlay welds of more than 3 layers, it is recommended to buffer with an electrode such as CEWELD® E DUR 350 Kb, which provides a weld metal of lower hardness. Overlay welds on steel with high tensile strength should be buffered with CEWELD®CroNi 29/9 HL or CEWELD®4370 HL. CEWELD®E DUR CE-Tube 62 can weld up to 3 times faster! (less current with more deposition) than conventional electrodes, which have up to 40% slag loss! Low amperage offers much lower heat input! 6 mm is ideal for welding in position and on sharp edges! CEWELD®E DUR CE-Tube 62 provides moisture resistant coating even in extreme humidity!
Tubular Hardfacing alloy for Sugar Mill knives and Hammers, Clinker Crushers, Liner plates, Ripper tines, Mixer blades, Gravel washing equipment, Ceramic mixer blades, Paddles, Extruders.
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Hardness |
|---|---|---|---|---|
| As Welded | 62 HRc |