Type
TIG filler metal for welding Aluminium Magnesium alloys.
classification
AWS
A 5.10: ER5754
EN ISO
18273: S Al 5754 (AlMg3)
Applications

Suitable for base metals with maximum 3% Mg. These alloys are suitable for a big range of applications in the construction sector, in general, and in the structural industry. Widely used in ship and vessel building.

Type
TIG filler metal for welding Aluminium Magnesium alloys.
Applications

Suitable for base metals with maximum 3% Mg. These alloys are suitable for a big range of applications in the construction sector, in general, and in the structural industry. Widely used in ship and vessel building.

Properties

This alloy offers excelent weldabillity when properly cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding The alloy shows good corrosion-resistance and an excellent colour-uniformity after anodizing. CEWELD® AlMg3 Tig offers also good resistance against seawater.

Classification
AWS
A 5.10: ER5754
EN ISO
18273: S Al 5754 (AlMg3)
F-nr
22
Suitable for

Aluminium alloys: AlMg Mn, AlMg 3Mn, AlMg1, AlMg2, AlMg2,7Mn, AlMg3, AlMg3,5, AlMgSi0,5, AlMgSi0,8, G-AlMg3Si, 3.3315, 3.3535, 3.3206, 3.3541, EN AW 5005A, EN AW 5754, EN AW 6060, EN AC 51100, EN AW 5454, EN AW 5251

Approvals
CE
Welding positions
PA
PB
PC
PD
PE
PF
PG
Redrying
Not required
Gas acc. EN ISO 14175
I1, I3
Analysis
Si Mn Cr Ti V Fe Cu Zn Al Mg Zr Be Ga+V Si+Fe
Rem. 3.2
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 80 190 20 HRc
Product sheet
declaration of performance
SDS
Product sheet
Ask quotation
SDS