Type
High-alloyed tubular wire on a C-Cr-V-W-B carbide basis for extreme hard deposits on parts subject to strong mineral abrasion, weldable without protective gas.
classification
EN ISO
14700: T Fe15
DIN
8555: MF 10-GF-65-G
Applications
Hardfacing and rebuilding parts that faces severe agressive abrasion in cement industry, mining and stone crushing.
Type
High-alloyed tubular wire on a C-Cr-V-W-B carbide basis for extreme hard deposits on parts subject to strong mineral abrasion, weldable without protective gas.
Applications
Hardfacing and rebuilding parts that faces severe agressive abrasion in cement industry, mining and stone crushing.
Propriétés

Extreme abrasion resistant with improved impact properties when combined with OA 400 as buffer layer. Due to the combination Cr-V-W-B carbides the deposit structure contains very fine particles that results in excellent wear resistance against heavy abrasion. Usualy the maximum number of layers is 2 till 3 but when using a special stringer build up technick with release cracks, upto 15 layers is possible.

Classification
EN ISO
14700: T Fe15
DIN
8555: MF 10-GF-65-G
Convient pour

Nihard IV segmented roller and parts without buffer layer, slurry pumps, loaders, sand and earth moving equipment such as buckets and teeth, dredge buckets, crushing equipment, rockwool rolls and brick industry, cement rollers, table segments, wear plates etc.

Positions de soudage
PA
PB
PC
Etuvage
140°C / 24 hr
Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
5 1.1 0.8 25 6 2 0.5
Propriétés mécaniques
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 63 HRc
fiche produit
déclaration de conformité
FDS
fiche produit
demander un devis
FDS