Type
Flux-cored wire for submerged-arc welding.
classification
EN ISO
14700: T Fe9
Applications
Building up worn out parts that suffer from wear combined with high impact, buffer layers etc.
Type
Flux-cored wire for submerged-arc welding.
Applications
Building up worn out parts that suffer from wear combined with high impact, buffer layers etc.
Propriétés

Austenitic deposit with strain hardening properties and no limits in the number of layers. The deposit is non magnetic and can not be flame cut. Extreme resistance to heavy impact loads. The weld deposit offers fair corrosion resistance and has strain hardening properties. This alloy should be applied at highest impact and pressure loads applications. Best to be used with welding flux FL 915

Classification
EN ISO
14700: T Fe9
Convient pour

Rebuilding rails, crossings, crushing hammers, dredger teeth, rollers, blast furnace, mantles, Hardfacing manganese hard stee, buffer layers etc..

Positions de soudage
PA
PB
PC
Etuvage
140°C / 24 hr
Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
0.5 0.9 16 15 1.2 1.5 0.2 Rem.
Propriétés mécaniques
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 240 HB
As Welded 500 HB
fiche produit
déclaration de conformité
fiche produit
demander un devis