EnDOtec DO*332
Merk
Ceweld product
Type
High-alloyed fluxcored wire on a C-Cr-Mo Carbide basis for extreme wear resistant deposits on Parts subject to strong mineral abrasion.
classification
EN ISO
14700: T ZFe14
Toepassingen
Rebuilding and or protecting parts that faces extreme abrasion with medium impact.
Type
High-alloyed fluxcored wire on a C-Cr-Mo Carbide basis for extreme wear resistant deposits on Parts subject to strong mineral abrasion.
Toepassingen
Rebuilding and or protecting parts that faces extreme abrasion with medium impact.
Eigenschappen
High wear resistance and austenitic structure deposits. The deposit gives already a very good hardness in the first layer. A buffer layer with CEWELD® OA 4370 or CEWELD® OA MnCr is recommended in case of sensible basematerial or old hardface-layers. Weldable without protective gas.
Classification
EN ISO
14700: T ZFe14
Geschikt voor
Cement industry, pumps, mixer blades, earthmoving equipment, dredging equipment and parts, wear plates, crushing equipment, blast furnace parts etc...
Lasposities
Note title
Hardness HRc
first layer on mild steel: 48-55HRc, third layer on mild steel: 58-60HRc
Mechanische waarden
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Hardness |
|---|---|---|---|---|
| As Welded | 53 HRc |