Selectarc CuNi30

Merk
Selectarc
Ceweld product
Type
Beklede elektrode voor het lassen van Koper-nikkel legeringen
classification
AWS
A 5.6: E CuNi
EN ISO
17777: E Cu 7158
W.Nr.
2.0838
Toepassingen
Smeed- of gietkoper-nikkellegeringen, scheepstoepassingen, ontziltingsapparatuur.
Type
Beklede elektrode voor het lassen van Koper-nikkel legeringen
Toepassingen
Smeed- of gietkoper-nikkellegeringen, scheepstoepassingen, ontziltingsapparatuur.
Eigenschappen

Uitstekende corrosieweerstand in zeewater en tegen aangroei. Geschikt voor ongelijksoortig lassen van Monel Alloy 450 aan Nikkel 200 en andere koper-nikkellegeringen. Kleine diameters kunnen in alle posities worden gebruikt.

Classification
AWS
A 5.6: E CuNi
EN ISO
17777: E Cu 7158
F-nr
34
W.Nr.
2.0838
Geschikt voor

Cu7158 (CuNi30Mn2FeTi), 2.0838

Mat.n: 2.0878, 2.0882, 

(Monel 67): Wrought and Cast Alloys of 70-30, 80-20 and 90-10 Copper Nickel Alloys, Monel Alloy 450, Nickel 200, CuNi10Fe, CuNi20Fe (2.0878), CuNi30Fe (2.0882).

Lasposities
PA
PB
PC
PD
PE
PF
Herdrogen
Not required
Analyse
Si Mn P Ti Fe Zn Pb Sn Al Cu+Ag Ni+Co S Cu As
0.25 1 0.25 0.55 30 Rem.
Mechanische waarden
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 360 30 HRc
Product sheet
product sheet
Ask quotation
Type
Copper-Nickel alloyed Mig / Tig welding wire.
classification
AWS
A 5.7: ERCuNi
EN ISO
24373: Cu 7158 / CuNi30Mn1FeTi
W.Nr.
2.0837
Toepassingen
This Copper-Nickel weld metal is widely used for marine and desalination applications. Dissimilar-welding applications for this alloy are joints between Monel alloys or Nickel 200 and Copper-Nickel alloys. Often used for surfacing on steel by using Ceweld NiTi-3 as a barrier layer. Shipbuilding, seawater evaporation plants, tubes, pump building, offshore, desalting equipment and parts etc.
Type
Copper-Nickel alloyed Mig / Tig welding wire.
Toepassingen
This Copper-Nickel weld metal is widely used for marine and desalination applications. Dissimilar-welding applications for this alloy are joints between Monel alloys or Nickel 200 and Copper-Nickel alloys. Often used for surfacing on steel by using Ceweld NiTi-3 as a barrier layer. Shipbuilding, seawater evaporation plants, tubes, pump building, offshore, desalting equipment and parts etc.
Eigenschappen

Sound, pore free deposits on ferrous and non-ferrous base materials offering excellent resistance to corrosion in sea water. 

Classification
AWS
A 5.7: ERCuNi
EN ISO
24373: Cu 7158 / CuNi30Mn1FeTi
F-nr
34
W.Nr.
2.0837
Geschikt voor

(Monel 67): Wrought and cast alloys of 70-30, 80-20 and 90-10 copper nickel alloys, Monel 450, (alloy 450),  Nickel 200, CuNi10Fe, CuNi20Fe (2.0878), CuNi30Fe (2.0882), 2.0872 - CuNi 10 Fe 1 Mn (CuNi 10 Fe),

Lasposities
PA
PB
PC
PD
PE
PF
PG
Herdrogen
Not required
Gas acc. EN ISO 14175
I1, I3
Analyse
Si Mn P Ti Fe Pb Cu+Ag Ni+Co S Other
0.2 0.5 0.01 0.35 0.55 0.01 Rem. 30.5 0.01
Mechanische waarden
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
RT
As Welded 200 420 36 200 115 HB
Product sheet
MSDS
product sheet
Ask quotation
MSDS