253 MA Tig | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

CEWELD 253 MA Tig is designed for welding austenitic chromium-nickel steels such as 253MA

classification

EN ISO

14343-A: W 21 10 N

W.Nr.

1.4835

Toepassingen

For use in high temperature furnaces, combustion chambers, burners etc Not suitable for applications exposed to wet corrosion. Prior to welding, it is recommended to carefully brush or ground black plates and previous weld beads.

Type

CEWELD 253 MA Tig is designed for welding austenitic chromium-nickel steels such as 253MA

Toepassingen

For use in high temperature furnaces, combustion chambers, burners etc Not suitable for applications exposed to wet corrosion. Prior to welding, it is recommended to carefully brush or ground black plates and previous weld beads.

Eigenschappen

Cerium combined with silicon improves the oxidation resistance and erosion-corrosion resistance in oxidizing and neutral environments, whereas the nitrogen allows superior strength at high temperatures. Therefore, this filler wire shows excellent resistance to high temperatures (most suitable temperature range is 850 - 1100 °C), high creep strength, very good resistance to isothermal and, particularly, cyclic oxidation.

Classificatie

EN ISO

14343-A: W 21 10 N

W.Nr.

1.4835

Geschikt voor

Outokumpu 253 MA (1.4835)

Outokumpu 153 MA (1.4818)

Goedkeuringen

CE

Lasposities

Herdrogen

Not required

Gas acc. EN ISO 14175

I1

Analyse

C	Si	Mn	P	S	Cr	Ni	Mo	Nb	N	W	Cu	Ce
0.07	1.5	0.6	0.01	0.001	21	10	0.1	0.007	0.16		0.13	0.04

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Impact Energy (J) ISO-V	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	RT	Hardness
As Welded	410	600	33	110	HRc

productblad

prestatieverklaring

VIB

productblad

VIB

253 MA Tig

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.