Type
Medium -alloyed seamless fluxcored wire on a C-Cr-Mo-W-V basis offering high hardness up to 550ºC.
classification
AWS
A 5.21: ERFe-8
EN ISO
14700: T Fe8
W.Nr.
~1.2606
DIN
MSG 3-GF-60-GPZ
Toepassingen
Recommended for parts subject to strong mineral abrasion and erosion that faces increased working temperatures up to 450°C.
Type
Medium -alloyed seamless fluxcored wire on a C-Cr-Mo-W-V basis offering high hardness up to 550ºC.
Toepassingen
Recommended for parts subject to strong mineral abrasion and erosion that faces increased working temperatures up to 450°C.
Eigenschappen

Very good abrasion resistance in combination with impact even at higher temperatures up to 450ºC. To much layers should be avoided, preheat is necessary to avoid cracking. A buffer layer with AA M690 or AA M37-42 is recommended in case of sensible base material or old hardfacing layers.

Classificatie
AWS
A 5.21: ERFe-8
EN ISO
14700: T Fe8
W.Nr.
~1.2606
DIN
MSG 3-GF-60-GPZ
Geschikt voor

HRc 58-62, Cement pumps, crusher bars, hammer and blooming table rolls, mineral and brick industry, stone crushers.

Lasposities
PA
PB
PC
PF
Herdrogen
Not required
Gas acc. EN ISO 14175
M21
Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
0.5 1.25 1.3 5.7 1.4 0.3 Rem. 1.3
Mechanische waarden
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 59 HRc
productblad
conformiteitsverklaring
VIB
productblad
vraag offerte
VIB