OA 4028 | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

Fluxcored welding wire for corrosion resistant hardfacing applications

classification

EN ISO

14700: T Fe8

Toepassingen

Rebuilding parts that faces wear combined with corrosion and impact.

Type

Fluxcored welding wire for corrosion resistant hardfacing applications

Toepassingen

Rebuilding parts that faces wear combined with corrosion and impact.

Eigenschappen

Extreme tough and corrosion resistant weld deposit, well suited for parts that encounter wear from sea water plant and power plant operation. This acid corrosion resistance alloy has a 14% Cr. content combined with 0,3% carbon that results in excellent wear properties.

Classificatie

EN ISO

14700: T Fe8

Geschikt voor

Bridge bearings, sealing surfaces, corrosion slide ring sealing, roller bearings, centrifuges, valves, pumps, shafts etc.

Lasposities

Herdrogen

Not required

Analyse

C	Si	Mn	Cr	Ni	Mo	Nb	Ti	V	N	Fe	W	B	Co	Cu	Al
0.3	0.6	0.8	14	0.4

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				47 HRc

productblad

prestatieverklaring

conformiteitsverklaring

VIB

productblad

VIB

OA 4028

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.