SA 309LNb strip | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

Solid stainless steel welding strip

classification

AWS

A 5.9: EQ309LNb~

EN ISO

14343-A: B 22 12 L Nb

W.Nr.

1.4556

Toepassingen

Boilers, vessels, tube cladding, valves etc.

Type

Solid stainless steel welding strip

Toepassingen

Boilers, vessels, tube cladding, valves etc.

Eigenschappen

Latest generation clean melting quality guarantees optimum metallurgical quality and attractive welder appeal. Combined with our high basic electro slag flux FL 830 ESHC excellent results are obtained in both deposition rate as minimum delution rate due to the higher slag temperature compare to other electro slag fluxes.

Classificatie

AWS

A 5.9: EQ309LNb~

EN ISO

14343-A: B 22 12 L Nb

W.Nr.

1.4556

Geschikt voor

SA 309LNb is developed for cladding applications in case AISI 347 is required in the first layer on mild steel.

Goedkeuringen

CE

Lasposities

Herdrogen

Not required

Analyse

C	Si	Mn	P	S	Cr	Ni	Mo	Nb	N	W	Cu
0.05	0.5	2	0.02	0.02	24	12.5	0.5

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded	450	600	>30	HRc

productblad

prestatieverklaring

VIB

productblad

VIB

sa-309lnb-strip-for-submerged-arc-and-electro-slag-welding

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.