SACW MnCr | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

Flux-cored wire for submerged-arc welding.

classification

EN ISO

14700: T Fe9

Toepassingen

Building up worn out parts that suffer from wear combined with high impact, buffer layers etc.

Type

Flux-cored wire for submerged-arc welding.

Toepassingen

Building up worn out parts that suffer from wear combined with high impact, buffer layers etc.

Eigenschappen

Austenitic deposit with strain hardening properties and no limits in the number of layers. The deposit is non magnetic and can not be flame cut. Extreme resistance to heavy impact loads. The weld deposit offers fair corrosion resistance and has strain hardening properties. This alloy should be applied at highest impact and pressure loads applications. Best to be used with welding flux FL 915

Classificatie

EN ISO

14700: T Fe9

Geschikt voor

Rebuilding rails, crossings, crushing hammers, dredger teeth, rollers, blast furnace, mantles, Hardfacing manganese hard stee, buffer layers etc..

Lasposities

Herdrogen

140°C / 24 hr

Analyse

C	Si	Mn	Cr	Ni	Mo	Nb	Ti	V	N	Fe	W	B	Co	Cu	Al
0.5	0.9	16	15	1.2	1.5			0.2		Rem.

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				240 HB
As Welded				500 HB

productblad

prestatieverklaring

conformiteitsverklaring

productblad

Flux-cored wire for submerged-arc welding

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.